If you like to learn about coding, electronics, or CAD, you may find these projects helpful or entertaining.
-
EuRobot lighthouse
As part of the EuRobot 2020 competition, we had to design a lighthouse that could rise by at least 70cm and rotate a light source. Based on the dimensional constraints, we agreed that the best approach would be to design a scissor lift. We had limited access to a mill, which meant that we had…
-
Milliohm meter
Ordinary multimeters use a voltage divider to compare the resistor under test with a known reference resistor. This works well for large resistance values, but the resistance of the test leads makes it impractical to measure small resistance values (typically 1ohm or less). A milliohm meter gets around this limitation by using a 4 wire…
Mani's projects 